Chainsaws are great tools to cut down a tree or making an amazing artwork out of a wood log by carving.
But your tool requires proper maintenance for a flawless performance over the years.
One most important part of taking proper care of the chainsaw is using a good quality oil for its bars and surface after cleaning.
You can easily get good quality oil for your tool. You can also check this post if you’re confused to choose one for your one.
Top 5 Chainsaw Bar Oil Reviews
- Quantity: 1-Quart;
- Weights 1.9 pounds.
The container of Sun Joe SWJ-OIL is so light and small that, you can put it in your jacket pocket and carry with you whenever you go in the woods with your chainsaw. This oil will be the best for you if (1) you are using chainsaw of the same Sun Joe brand and (2) you are looking for a quality oil to lengthen the parts life.
This oil ensures that your beloved saw runs nice and smooth even when you are cutting thick oak logs. When the saw runs on high speed, increased friction may cause the motor to overheat. But proper lubricating of the parts can prevent such problems.
Besides, chainsaw oils are good at preventing rust and corrosion of the bar and chains. In case, if you are using Sun Joe chain saw, then a replacement bar and chain may cause a limb or two upon wearing off the. This oil is expected to lengthen the process and save you from wasting money on replacement too early.
- Lengthenes the life of chainsaw parts;
- Portable pack.
- Quantity: 1-Quart;
- Weights 2.35 pounds.
Just like Makita power tools and accessories, this lubricating oil is also high quality one. It reduces friction, prevents wearing, ensures maximum output from the saw you using. The best part is, it’s not meant for a particular brand. You can pour it any chainsaw regardless of the model number and manufacturer.
Even in the freezing environment, this oil will make sure that your machine will run rather than sleep. As per the advertisement, this oil will be functional even in the bizzard. The 1 quart pack weight more than it should be. The reason is, the oil in the container is denser than the lower weight versions of different marketers. Which is the pre condition of a lubricating oil for a chainsaw.
- Can be used in harsh weather;
- No cons.
3. HUSQVARNA Chain Saw Bar/Chain Oil
- Quantity: 1 Gallon;
- Weights 8 pounds.
For regular use, its best to buy chainsaw oil in a large pack. This applies especially when you are accustomed to using high quality saw, saw parts and grease. This oil from HUSQVARNA is meant for HUSQVARNA chain saws to match the perfection. Unlike othe chea oils, it won’t throw-off when the saw is running highest speed.
To achieve the right amount of thickness and expected qualities, tackifier additives have been mixed with base stocks. The result is a super smooth chain and bars for longer period. Even after running on high speed for an hour, neither the bar nor the chain will overheat. Friction against these two has been reduced considerably; so, there is less heat produced.
However, to save on chainsaw oil, it’s best to purchase this one gallon pack. So that, you will always be prepared with your greaser. Your machine won’t run dry for a single day.
- Minimizes overheating of the tool;
- Protects against friction.
- Recommended for exclusively Husqvarna chainsaws.
4. Oregon Chainsaw Bar and Chain Oil
- Quantity: 1 quart;
- Weights 1.9 pounds.
May be you are satisfied with the oil you are currently using in your chainsaw for lubricating the chain. But there is no harm is exploring even better ones. The effects of a pro quality oil can not be ignored in protecting the pricey parts of a chainsaw. Trying out this 1 quart pack from oregon can change your experience of using chainsaw oil so far.
It’s needless to mention how perfect the chainsaw, bars and chains are which are manufactured by oregon. It’s fine if you are using saw or its replacement parts from other brands. But a good greasing oil can make the performance even better. Poor quality oil can fail to minimize friction as it should be. Hence, it will affect the speed you are receiving and overall performance of your saw.
This oil has the right consistency and particles to minimize friction to the lowest possible rate. So that you can always get the best out of your power tools.
- Prevents jamming;
- Maximizes the speed of the saw;
- Can be used in any brand made saws.
- Little bit pricey.
- Quantity: 1 gallon;
- Weights 1.9 pounds.
People living in the north pole, even you need to use a chainsaw, then you must need a greasing oil aswell, wich will not get solid in that freezing air. Meet Mag 1 bar and chain oil that stays put even under -35 degree Fahrenheit, keeing the chain and bar hydrated.
Some has find this oil thinner than other brands. That can be the reason of different additives added in this oil. To prevent wearing of the chain, anti wear additives have been used in it. Besides, it has a higher adhesion quality to prevent throw-off.
Over all, I prefer using it during winter. In summer, it can literally seem thinner. But I won’t say that will affect its quality at all.
- Best for freezing weather;
- Prevents wearing;
- May seem thinner than other chain oils.
How to Choose Chainsaw Bar:
In order to take proper care, you need to oil your chainsaw often. For this, you need to have the perfect chainsaw bar oil which you can pick by following these simple steps.
1. Lubricating Properties:
Before buying chainsaw oil, you should check the lubricating properties of the oil. Oil with higher lubricating helps the saw to run smoothly. This also reduces the possibility of friction between surfaces.
2. Speed of Your Chainsaw:
Also check the speed of your chainsaw while buying oil for it. Because this oil you’re using is to maintain the speed and the higher the speed rate the better the performance of the saw. So you need to oil the saw frequently to maintain the rate.
3. Cleanse Metal Surface:
You may also use the oil to clean the surface of your chainsaw. Because the particles come out while you saw can damage the surface of your chainsaw. So to keep the metal surface of the saw, oil it regularly.
And the oil with high resistant film, will keep the surface safe and protected from any damage. So while buying oil for your chainsaw don’t forget to look for the cleansing properties keenly.
Viscosity of the oil is mainly measured in its weight. It also related to the tackiness of the specific oil with which you can determine how thick and sticky the oil is.
For viscosity, you’ll find mainly 3 types of ratings, such as- summer (40- 50 weight), all season (30- 40 weight) and winter (20 or less). Generally, you should choose summer or all season chainsaw bar oil unless it is winter.
5. The Base of the Oil:
Mainly two types of materials are used as the base of the chainsaw bar oil. Chainsaw bars used to lubricate with petroleum-based oil in the old days. But the oil made with vegetable base is the most effective lubricate for chainsaws. This type of oil is cheaper and biodegradable. So choose the vegetable-based oil that is specifically developed for a chainsaw.
For most of the parts of your chainsaw the renowned bar oils manufacturers re Husqvarna, Oregon, Makita, etc. but you’ll also find the big chainsaw manufacturers offer their own chainsaw bar oil.
Though all of them are pretty much same, if the manufacturer of your chainsaw offers oil, you should choose that or you can go for any of these popular brands.
7. Engine Type of Your Chainsaw:
The most important thing you should consider while buying the oil is the engine type of your chainsaw.
If you saw comes with the minimal combusting engine, you should avoid oils with high combusting additives. Otherwise, they are okay with your tool.
You should always choose the best bar oil for your chainsaw because this can help you to maintain the speed of the tool and also protect it from getting damaged.
And for choosing the right type of oil, we’ve brought to you the best oils of the market. You can choose from them that suits your chainsaw.
The easiest way to get the right oil for your saw must check the viscosity and the base of the oil. So get that and take good care of your chainsaw.
If you’ve anything else to know that isn’t included here, feel free to ask. I’d love to get the info for you.
If you liked the post, please leave your feedback.
Average rating / 5. Vote count: