Wearing safety gear is a must for a tree surgeon. Because they have a huge risk of getting injured by the tool very easily.
One of the most vital safety gear is safety boots or chainsaw boots. They can protect your feet from cuts or any falling tree log.
While choosing a pair of chainsaw boot, you should think that you won’t feel uncomfortable if you have to work for a long time and can protect your feet from an accident.
So choosing the right pair may not be so easy for you. You need to consider some important features that make a safety boot the best one.
And they are-
How to Select the Best Chainsaw Boots:
The best pair of safety/ chainsaw boots can ensure to protect your foot from accidental chainsaw cuts, falling any objects, sharp objects, slippery work surface or cold temperature.
Having a good quality boot is must have before start working with a chainsaw or other power tools. So try to get a pair that matches you and make you comfortable at work. You can consider the mentioned features while buying to get the best one.
1. Toe Cap:
The most important thing you should not skip is the toe cap of the boots. That means the boots need to have a steel cover at its toe box. Though the steel casing can increase the weight of the boots the shielding is the best compensate for this.
In addition, as steel is the good conductor of heat, your boots will become cold after a while if your working area is cold.
Nowadays, you’ll find boots are made with different alternative materials like- alloy and composite toe caps. Among these two, the alloy is lightweight but less protective in case of compressive forces. On the other hand, composites are lightweight and also able to provide the least protection.
No matter which type you choose, check that the toe caps must meet or exceed the EN 1SO 20345:2011 safety standard. Only then they can withstand 200 joules of force & up to 15KN stationery force pressure.
If the boots don’t meet the requirement, just tick it off from your lost.
2. Protection Classes:
Every chainsaw comes with different degrees of protection which determine how much trustworthy the safety boot is. This is the reason the shielding are categorized into 3 classes.
Class 1 boots are able to stop the chain speeds up to 20 m/s, lass 2 can do it at 24 m/s and class 3 stops the spinning at 28 m/s.
Generally, most of us think that class three boots are expensive than class one but you can find many class three boots cheaper than them.
So you need to find the boots that are can protect you from the speed of your chainsaw. Which means you also need to consider the speed of your chainsaw.
Chainsaw is the most dangerous tool among all other power tools and it becomes worse when mishandled or any unwanted accident occurs. This is why your safety boots should match some basic regulations before considered as the best one.
A good quality safety boot must be able to mitigate any risks according to EN 1SO 20345:2011, the most used safety standard legislation.
According to the legislation, your boots must meet the requirements like-
- Toe cap testing
- Construction of rubber
- Heat resistance capability up to 3000C
- Cleated boots
- Includes a penetration resistant midsole
- Waterproof uppers
- Able to resist static electricity & possess an energy absorbing heel.
4. Fit and Comfort:
Choose a pair of boot that is considerably lightweight so you won’t feel fatigued and sore after spending a couple of hours in it.
If you need to spend a long time on rugged terrain, make sure to have an ergonomically designed boot to avoid fatigue. This type of boots will help you to reduce joint pains and arches in other parts of your body.
If you’re planning to buy your boots from online, make sure that they are the right size for your feet.
Another important fact you should check before buying a pair is durability. Make sure that the material with which the boots made are really of high quality and can serve you for a long time.
So check well for the reviews of the shortlisted boots and what previous customer’s opinion about the longevity of the boot, then choose for you.
6. Working Environment:
Considering your working environment is another most important fact for buying your safety boots. For example,
Cold places require well-insulated boots, but they get heat up quickly so they are not suitable for hot places or summer time.
For slippery area, choose boots with slip-resistance outsoles. If you have to work in the different climbing work area, boots with ankle support are the right choice.
If you are a professional woodworker who needs to work for a long time with chainsaw and woods, look for the lightweight boots.
7. Ease of Cleaning:
It is obvious for woodworkers to cover with sawdust, tree sap, mud or a lot of grime & grease. So you need a boot that is easy to clean after use because if you’re not able to clean it thoroughly, it’d get damaged earlier than normal.
The cleaning process may differ from brand to brand. Some are machine washable, some are instructed to clean with brush or sponge.
Choose the one with which process you are comfortable after working for a long period of time.
This is the fact you must think of while buying your boots. Generally, we all think that expensive products are really high quality. But it is not true for all time!
If you spend a good amount of time researching about the product you need, you’ll be found one within your budget.
Match the features with your requirements and pick one of your budgets.
Top 6 Chainsaw Boots Reviews
- Air-cushioned 1.25″ heel;
- reflective stripe;
- Grade 1 steel toe.
Unlike any normal steel toe gum-boot, these chainsaw boots are spacious for bigfoot people. These high knee boots will reach right under your knees for good protection. There is a shoelace on top of the ‘shin’ part so that you can secure it around your shin. The lace makes these boots adjustable for different foot sizes.
These are not insulated boots, but still, you will be able to wear it with wooly socks. There is much room for socks in it. These boots are made of 100% rubber and the inner part has a canvas lining. But that doesn’t make it much breathable.
For small size, there is not much option from this model. So, women may need to choose from other models. However, these boots will give you protection against mid-level chainsaw speed up to 25 m/s. The air cushioned heels make it comfortable for wearing for a long time.
- Suitable for wide feet;
- Rugged finish;
- Anti-slip and abrasion resistant.
- Not very breathable;
- Difficult to wear because of the small top cuff.
- Kevlar and Sympatex lining;
- Cut Level 3 certified.
May be the current boots you are using while operating a chainsaw is good enough for giving safety. But is it good enough to walk on slippery ground or even tricky places-like ladder? Most often people use a ladder to trim the top branches who don’t own pole saws. A misplacement of foot or slipping off can cause severe injury. For staying safe even in those circumstances, we need boots those have better grip along with cut resistance properties.
These boots from Rock Fall are not widely purchased online, hence it doesn’t have enough review to judge. But it has given all the magical properties to keep you safe against slipping off from a ladder, getting crushed by a fallen branch or log, get injured by a chainsaw and so on.
There are several lining of breathable and cut resistance fabric in the insole of these shoes. And the outsole is made protective from the toe to heel. To make it comfortable, the inner sole has a moisture absorbent bed. Overall, these are comfortable and protective shoes to pair with a chainsaw.
- Ladder grip on sole;
- Kevlar lining gives better cut resistance;
- Heat proof outsole.
- Not widely used.
- 1.25″ heel;
- 0.5’’ platform;
- Rubber pull straps.
To stop an ever spreading forest fire, only splashing water doesn’t help. To prevent spreading a big fire in the forest, only one option works undoubtedly and that is, cutting a part of the parest around the fire. This way, the fire separates from the forest and stops eventually. However, cutting trees in that situation needs courage and extra protective equipments.
These fire fighter’s boots are meant for fighters who especially needs to use a chainsaw to put a least on a forest fire. Other than making these chemical and fire resistant, these are highly supportive as well. Extra support and padding in the interior of the boots to prevent ankle roll over. This also helps to provide arch support so that, any fatigue will not be felt even after hours of running.
Putting these boots on is super easy. There is a pair or rubber straps on top; just pull them upward and that’s it, you are ready in seconds. These boots are very expensive. To make them resistant to high speed chainsaw and fire, high quality materials are used.
- Best for forest firefighters;
- Flame and chemical resistant;
- Excellent support upon long use.
- 1.25″ heel;
- 0.75’’ platform;
- Highest Class Chainsaw Protection.
Though the name suggests that these are bushwacking boots, I prefer using these for construction sight as well. In construction sites, workers often need to use chainsaws to cut out debris for easier clean up. Thick platform shoes like these Bushwackers with .75’’ platform, neither you will feel any debris not get hurt by those.
These are slip on boots with adjustable nylon cuffs. The lace on the calf makes sure that the residues from debris or wood dust from sawing will not enter in the boots. These high quality boots are compatible with ice studs. Using those, you can do bushwacking even in the snowy winter as well.
With only 2 pounds shipping weight, these shows are suitable for walking long distances. Still toes are great for giving protection against high speed chainsaws. However, some has complained about the discomfort of protective foam in the interior of the boots. Wearing a sock minimizes suh discomfort and mak wearing boots much comfortable.
- Suitable to use in construction sites;
- Adjustable cuff for dust proofing.
- No cons.
- Reinforced spiked heel;
- Polyester lining;
- Highest Class Chainsaw Protection.
While cutting woods from the forest, better grip of the boots are preferred over better protection from the chainsaws. The detachable caulks of this model are great not only for forests, but also for hiking or on the icy surfaces. These are not meant for winters though, because these are not insulated. But with a paot of socks, these boots can be used all year-round even in the winter. This way, you can save on expensive insulated boots.
These boots are fully laced, from ankle to shin to give better fittings. The polyester lining on the other hand gives unmatched flexibility and conform, you what you need and want in terrain walking. These are not well protected like steel toe ones, but are wearable for low range chainsaw using. Like collecting firewoods or cleaning up after a storm and so on.
- Suitable for forest and hiking;
- Calks can be replaced;
- Comfortable and long wearing.
- Doesn’t gives high class protection like steel toe boots.
- 1’’ heel;
- 0.5″ platform.
Using chainsaw in slippery or terrain surfaces is hectic. A pair of steel toe spiked chainsaw boots can be considered as life savers in those situation. These will give you the grip on surface you need, the protection against chainsaw you want and the comfort you deserve. So that, you can deliver the best you can.
These boots has air cushioned heel to make it comfortable and ultra flexible. These are not insulated, but still you can survive through winter with the same shoes. Just purchase bigger shoes of one or two size. You will have room for socks and liners. It is laced up boot, so, in the summer there will not be much problem for the extra room.
The cotton cancus lining makes these boots breathable in the summer. But to be honest, the weight of these shoes are too much for a long distance walking or for long wearing.
- Caulked for better grip;
- Steel toe;
- Mid Class chainsaw protected.
Hope this guideline will help you to choose your chainsaw boots easily. Because while working with a dangerous power tool like a chainsaw, you must protect yourself with proper safety gear. And safety boots are the one that can protect your feet from any unwanted cut or other accident.
The selection process is very easy!
Check the mentioned features carefully, match them with the available models and your needs, most specifically, your working area, the type of your chainsaw, comfort level, durability. Then pick the one that suits your requirement best.
How useful was this post? Click on a star to rate it!
Average rating / 5. Vote count: